Levitator RV Sewer Hose Support Kit, 7 ft Span
Levitator RV Sewer Hose Support Kit, 7 ft Span
Suspends your sewer hose above any terrain for a clean, complete drain.
Couldn't load pickup availability
- Free US shipping over $200
- 30-day returns
- 30-day warranty
The Levitator suspends your RV sewer hose above the ground on a tension line. No sag, no low spots, no dragging across the campsite. Works on grass, gravel, dirt, or pavement.
- Any terrain. Attaches at the RV outlet and at the park drain, so the ground underneath doesn't matter.
- Complete drainage. A straight downhill run means the tank empties fully and the hose stays clean inside.
- Fits standard connections. Universal bracket and clamps fit standard RV sewer hoses and fittings.
- 10 ft UV cover included. The same weather-resistant sleeve we sell separately.
- Packs small. The whole kit weighs 3.5 lb and stores flat in a bay.
In the box: mounting bracket, 2 hose clamps, 2 D-rings, tension line with cam lock, 10 ft cover (two 5 ft sections), drill bit for the clamps, instructions.
Span: up to about 7 ft between the RV outlet and the drain. Longer run? See the 15 ft Levitator.
Specs
Specs
Span up to about 7 ft from the drain. Kit weight 3.5 lb. Fits standard RV sewer hoses and fittings. Includes a 10 ft UV-resistant vinyl cover (two 5 ft sections). Steel band clamps, laser-cut bracket, tension line with cam lock.
Shipping & returns
Shipping & returns
Ships from Louisiana within 1-2 business days. $5 shipping on covers, $8 on kits, free over $200. 30 days to return any item (buyer pays return postage). Damaged on arrival? Email a photo and we replace it. 30-day warranty against defects.
Why RVers switch to the Levitator
-
Any terrain
Attaches at the RV outlet and the park drain. Grass, gravel, roots, or a curb in between, none of it matters.
-
Complete drainage
One straight downhill run. The tank empties fully and nothing sits in the hose between dumps.
-
Fits standard connections
Universal bracket and clamps fit standard RV sewer hoses and fittings. No adapters.
-
UV cover included
The 10 ft weather-resistant sleeve keeps the hose shaded and off the dirt.
-
Packs small
3.5 lb. Stores flat in a bay. Sets up in a couple of minutes.
-
Built to last
Laser-cut bracket, steel band clamps, and a cam-lock tension line. No plastic rungs to crack in the sun.
Set up in three steps
1. Clamp the D-ring to your RV's sewer outlet.
2. Clamp the bracket to the campground drain.
3. Clip the line to the D-ring and tighten the cam lock. Slide the cover on. Done.
FAQs
What is an RV sewer hose support?
An RV sewer hose support holds your sewer hose at a steady downhill angle between your RV's outlet and the campground sewer connection, so waste water drains completely instead of pooling in low spots.
Do I really need one?
If you camp with full hookups, yes. Without support, a sewer hose lies in low spots where gray and black water collect. That means slow drains, odors, and waste sitting in the line between dumps. Many RV parks also require the hose to be off the ground.
How is the Levitator different from accordion-style supports?
Accordion supports work from the ground up, so they only work as well as the ground under them. They sag between rungs, tip on gravel and roots, and crack in the sun. The Levitator suspends the hose in the air on a tension line, so the ground underneath doesn't matter.
What terrain does it work on?
All of it. Grass, gravel, dirt, sand, tree roots, ruts, slopes, even a curb between you and the connection.
Will it fit my camper's sewer hose?
Yes. It fits all standard RV and camper sewer hoses and works with most dump station setups. The connection positions are adjustable, so no special adapters are needed.
How far can it reach?
The 7 ft kit supports your hose up to about 7 ft out from the sewer connection and includes a 10 ft protective sleeve. For longer runs, the 15 ft Levitator is available for pre-order.
How does it attach to my RV and to the sewer?
A hose clamp and D-ring go on the RV outlet. The tension line clips to the D-ring with a carabiner. The bracket assembly clamps to the sewer clean-out with a second hose clamp. Tighten the cam lock and you're done.
Does it sag when dumping or when water flows through?
All lines sag a small amount. On the Levitator it can barely be seen, and it has no effect on drainage or support.
How much tension does it pull? Will it hurt the sewer pipe?
In testing with the faucet running and a large flush we measured about 8 lb of tension, and around 18 lb for a full span with a large dump. Campground sewer pipe is typically schedule 40 PVC rated far beyond that, so normal use is well within its limits.
Does it protect the hose from sun damage?
Yes. The kit includes a 10 ft UV-resistant vinyl sleeve that shields the hose from UV rays, weather, dirt, and ground abrasion, the main reasons sewer hoses crack and leak.
What about returns?
30 days from delivery to return any item. Email contact@rvlevitator.com with your order number. Buyer pays return postage. If something arrives damaged or defective, email a photo and we send a replacement at no cost.